RH104T Side-Exit Accelerometer
Vibration Sensors
RH104T Side-Exit Accelerometer
The RH104T is a side-exit IEPE accelerometer designed for installations where the connector must exit the sensor laterally rather than from the top. Its laser-sealed welded housing ensures exceptional ingress protection, making it the preferred choice for machinery in wet, dusty, or high-pressure wash-down environments. The side-exit cable configuration minimises protrusion height and is particularly useful in tight clearance applications on pumps, compressors, and industrial gearboxes.
Measurement Type: Vibration (acceleration)
Circuit Type: IEPE, laser seal welded housing
Connector Direction: Side exit
Frequency Range: 1 Hz – 15 kHz (±3 dB)
Key Specifications
| Measurement Type | Vibration (acceleration) |
|---|---|
| Circuit Type | IEPE, laser seal welded housing |
| Connector Direction | Side exit |
| Frequency Range | 1 Hz – 15 kHz (±3 dB) |
| Temperature Range | -55 °C to +121 °C |
| Output Signal | IEPE (2-wire) |
| Protection Rating | IP68 |
Applications & Use Cases
Installations with limited vertical clearance above sensor
Pump and compressor monitoring in wash-down environments
Gearbox vibration measurement in confined housings
High-pressure and immersion-rated machinery applications
Permanent installation on critical rotating assets
Vibration Sensors
- RW606(M) Wireless Vibration & Temperature Sensor
- RW506(M) Wireless Vibration & Temperature Sensor
- RH605 Wireless Triaxial Vibration & Temperature Sensor
- RH505 Wireless Vibration & Temperature Sensor
- RW625 Wireless Vibration & Temperature Sensor
- RW161 Wireless Vibration Transmitter
- RH103T Low-Frequency Accelerometer
- RH104T Side-Exit Accelerometer
- RH113 Low-Frequency Accelerometer
- RH104TC Accelerometer with Remote Sensing Cable
Related Vibration Sensors
Other products you might needReady to Deploy RH104T Side-Exit Accelerometer?
Our hardware specialists will help you select, configure, and deploy the right solution for your plant.